Robotics & Automation Engineering
Robotics integration, mobile robots, robotic inspection, and motion control for industrial automation. Robotics consulting in Vancouver and across Canada.
We integrate and build robotic systems for real operations — from mobile robots and pick-and-place cells to inspection rigs and multi-axis motion control. We handle the messy middle: sensors, control, safety, and integration with the rest of your line.
Overview
Most robotics projects do not fail at the robot; they fail at the integration around it — the sensing, safety, control, and the connection to the rest of your line. That messy middle is exactly where we focus. Whether you are evaluating your first cell, scaling an existing deployment, or trying to get a robot that demoed well to survive real-world variability, we engineer the parts that make automation dependable in production.
A typical engagement starts with a feasibility view: the task, the cycle time, the constraints, and an honest build-versus-integrate recommendation. From there we select hardware, plan motion and safety, and integrate with your PLCs, sensors, and vision so the system behaves as a closed loop rather than a fragile script. Where determinism matters, we use real-time fieldbuses such as EtherCAT.
We deliver a commissioned, documented system with the interlocks and guarding appropriate to the task, plus operator handover — not a proof of concept that only works on a good day. Robotics is rarely just robotics, so we bring vision, embedded, and controls expertise to the same problem instead of handing it between vendors.
A robotics engagement can start as an independent feasibility study or go straight to a working cell, depending on how much certainty you need first. We scope a narrow first milestone so you see motion on your real task early, then iterate toward production, and we are candid about cycle times, safety requirements, and whether an off-the-shelf integration beats a custom build. Safety and reliability are designed in from the start rather than bolted on, and everything is documented for your compliance process and your maintenance team. Because we also bring vision, embedded, and controls expertise, the sensing and software around the robot are part of the same engagement instead of a separate integration risk. If a task is not a good fit for robotics yet, we will tell you that before you invest.
Who this service is for
This service is a fit for teams in situations like these, where manual effort, integration gaps, or uncertainty is holding an operation back:
- Manufacturers and warehouses evaluating or scaling automation
- Teams with a robotic arm or AMR that needs real-world integration
- Operations that need repeatable, deterministic motion and safety
Problems we solve
We are typically brought in when an organisation is dealing with problems such as the following:
- Robots that work in a demo but fail against real-world variability
- Integration gaps between robots, sensors, PLCs, and software
- Safety and reliability concerns blocking deployment
- Manual, repetitive, or unsafe tasks that are hard to staff
Technical deliverables — what you get
A typical engagement produces a concrete, owned set of deliverables rather than a slide deck:
- Robot cell or mobile-robot integration with your existing equipment
- Motion control and, where required, deterministic fieldbus (e.g. EtherCAT)
- Sensor and vision integration for closed-loop behaviour
- Safety review and interlocks appropriate to the task
- Commissioning, documentation, and operator handover
Example use cases
Representative ways our clients across Canada apply this service include:
- Warehouse robotics and mobile robot (AMR/AGV) integration
- Robotic inspection and defect-detection stations
- Visual servoing — camera-guided robotic motion
- Pick-and-place and material-handling cells
- Retrofitting an existing robot into a production line
Technologies and focus areas
Depending on the project, the work commonly involves technologies and focus areas such as these:
- robotics consulting Vancouver
- robotics automation Canada
- robot integration
- mobile robots
- visual servoing
Industries we serve
We deliver this service for organisations across a range of industries, including:
- Manufacturing
- Warehousing & logistics
- Inspection & QA
- Research labs
How we work — the 5Tech process
Every engagement follows a clear path from the first conversation through to a documented handover:
- Feasibility: Assess the task, cycle time, and constraints; recommend build vs integrate.
- Design: Select hardware, plan motion, safety, and integration points.
- Build & integrate: Assemble, program, and connect to sensors, vision, and control systems.
- Commission: Tune, validate against real conditions, and hand over with documentation.
Frequently asked questions
How long does a robotics prototype take?
A focused proof-of-concept is typically weeks, not months. We scope a narrow first milestone so you see motion on your real task early, then iterate toward production.
Can 5Tech integrate with existing hardware?
Yes. A large part of robotics work is integration — we connect robots, sensors, PLCs, and software you already own rather than forcing a rip-and-replace.
Do you handle safety?
We design task-appropriate safety (guarding, interlocks, exclusion zones) as part of the engagement and document it for your review and compliance process.
Related services
Services we frequently combine with this one on the same engagement:
Related industries
Sectors where this service is most often applied:
Related insights
Further reading from our engineering team that connects to this service:
Test One Idea Before Committing to a Full Project
Send 5Tech one workflow, inspection task, sensor problem, robotics challenge, or prototype idea for a free first review. Start My Free First Phase — a free first review of one idea. If it is not practical, we will tell you.
Discuss your project with 5Tech
Tell us what you want to automate, prototype, or improve. Book a free engineering consultation — 5Tech serves businesses across Canada.